THE COMPANY

Brelko Engineering cc specializes in, and is dedicated to the development, production and marketing of an exclusive range of products for the bulk materials handling industry. Brelko products are primarily intended to assist in the control of spillage, carryback and dust, as well as promoting trouble free flow of material at belt conveyor transfer and load points. Brelko is accredited with ISO9001 certification -your assurance of the best quality.

PRODUCT RANGE:

BRELKO BELT SCRAPERS

A complete range of primary and secondary scrapers, V and Angle ploughs. Scrapers feature the patented V base blade and torsion holder mounting. The system is designed to make maintenance and blade changing as simple and as quick as possible. The removal of the scraper from the structure is therefore not necessary.

BRELKO CHUTE SEALING SYSTEMS (KEYSKIRT)

This patented chute sealing system is available in four sizes, each designed for a specific range of applications.

Size 1 This is a self adjusting flexible skirt sealing strip designed to be used with light weight conveyor belts. It is also available in a non toxic rubber grade with stainless steel track for the food industry.
Size 2 This is a self adjusting flexible skirt sealing strip featuring the patented Brelko multiple lip seal designed for rugged transfer applications. Specially formulated rubber compound ensures maximum seal life.
Size 3 A highly abrasion and cut resistant polyurethane sealing strip is mounted in the patented Brelko track system which features simple adjustment to allow for skirt wear. The system is designed to provide optimum containment of large lumpy material and is especially effective when used in conjunction with Brelko Feedboots.
Size 4 This is a self adjusting flexible skirt sealing strip featuring the patented Brelko multiple lip seal designed for rugged transfer applications. Specially formulated rubber compound ensures maximum seal life.  For use on belts wider than 1200mm.

BRELKO BELT SUPPORT SYSTEMS

Brelko Feedboots are designed to be used at load points to support the conveyor belt, preventing belt sag between idler rolls and thereby ensuring maximum skirt sealing and spillage control. UHMW Polyethylene material is used to line the load surfaces and therefore dramatically reducing friction and wear.

UNIVERSAL FEEDBOOT

This model features adjustable wing plates to allow the belt troughing angle to be accurately accommodated thereby assisting in maintaining correct belt tracking and complete skirt sealing.

COMBINATION FEEDBOOT

In this model the load surfaces are mounted on rubber spring units allowing deflection under load conditions while still maintaining a form seal line for the skirt system. It is used where variable load conditions with relatively small particles are encountered.

HI-IMPACT IDLER (BTA)

This system has been developed to be used in conjunction with garland idlers to absorb large impact loads due to the transfer of very large lumps of material. Mechanical damage to conveyor idlers, cradles and supporting structure are thus greatly reduced or eliminated.

BRELKO BLOCKAGE REMOVAL AND BULK FLOW MAINTENANCE SYSTEMS

Brelko Air Cannons use the patented Brelko diaphragm discharge system. The only moving part is a flexible rubber diaphragm which ensures totally trouble free operation even in extremely dirty and hostile environments. Used in conjunction with the Brelko Air Lance discharge nozzle, the build up of fine materials in chutes, hoppers etc. can be prevented this avoiding blockages and flow stoppages.

BRELKO HIGH PRESSURE DUST SUPPRESSION & BELT WASH SYSTEMS

Brelko Engineering has developed a range of modular high pressure pump units which when used with the appropriate nozzles and control circuits provide a fine water mist for the suppression of dust at transfer points and secondly can provide a flat high impact spray for the removal of fine residual material from the belt return strand. In both cases the systems are characterised by the use of high pressure water (30 to 40 bars) therefore only a very low flow rate is required to achieve the desired result and does not require compressed air for the atomisation.